PRODUCTS

Gazpromneft Diesel Extra 20W-50 designed for use in wide range of turbocharged and naturally aspirated diesel engines under moderate operation conditions. High purity base oils and selected combination of additives provide protection against high temperature deposits, oil thickening and wear. Suitable for engines meeting Euro 2 emission standard.

Eurol Super Lite 5W-40 is a fully synthetic engine oil for use in gasoline and diesel engines of passenger cars and light commercial vehicles. Additionally, this oil is seamlessly used in cars with a catalyst, turbo, and direct injection. Eurol Super Lite 5W-40 ensures an extremely quick formation of a stable lubricating film during cold starts and high thermal stability under heavy operating conditions. Eurol Super Lite 5W-40 not only provides excellent protection against wear but also against rust and corrosion, while special additives keep the components clean from dirt, sludge, and deposits. Eurol Super Lite 5W-40 has fuel-saving properties and is compatible with both synthetic and mineral engine oils. In short: the oil for those who seek the best for their engine. Eurol Super Lite 5W-40 can also be used in BMW engines where the BMW Longlife-01 <2019 performance is recommended.

Eurol Diesel-Guard 15W-40 is a modern engine oil, developed in accordance with the latest requirements for oil consumption and emissions, and meets most of the current quality standards of both European and American engine manufacturers. Eurol Diesel-Guard 15W-40 is ideally suited for heavy-duty diesel engines in trucks with or without turbo and for off-road applications. Eurol Diesel-Guard 15W-40 amply meets the reduced limits regarding deposits on the piston crown and the rest of the piston. The prescribed oil change interval is effortlessly achieved regardless of the type of engine and conditions. Eurol Diesel-Guard 15W-40 can be used in Euro II, Euro III, Euro IV, and some Euro V engines where high-sulfur fuel is used. Eurol Diesel-Guard 15W-40 is not suitable for use in engines with Diesel Particulate Filter (DPF).

Eurol Turbosyn 10W-40 is a semi-synthetic engine oil that is universally applicable in gasoline and diesel engines (in passenger cars and light commercial vehicles). This oil ensures a trouble-free start, even at low temperatures, and provides an excellent lubrication film at high temperatures.

Eurol Turbosyn 10W-40, due to the applied additive package, ensures trouble-free engine operation, while also allowing for fuel savings and reduced emissions. The unique composition results in minimal evaporation losses.

This oil possesses excellent anti-wear, anti-foam, and anti-corrosion properties. Together with the detergent and dispersant properties, this oil ensures a clean and reliable engine. Due to its resistance to high temperatures and oxidation, Eurol Turbosyn 10W-40 will maintain its quality and not thicken.

Eurol Evolence 5W-30 is a fully synthetic engine oil, specifically suitable for American and Asian gasoline engines in passenger cars, SUVs, and vans. This engine oil can be used in cars equipped with catalysts, turbo engines, and direct injection systems where API SP (-RC) or ILSAC GF-6a is prescribed. Eurol Evolence 5W-30 is suitable for vehicles running on gasoline fuels containing up to 85% ethanol (E85), as well as LPG and CNG.

Eurol Syntence 5W-30 is a fully synthetic oil for use in gasoline, LPG, and diesel engines of passenger cars and light commercial vehicles equipped with particulate filters (for the Euro-4 emission standard). This oil is specifically developed for passenger cars and light commercial vehicles of the VAG group (Volkswagen, Audi, Seat, and Skoda) and is suitable for very long oil change intervals (up to 30,000 km for gasoline and up to 50,000 km for diesel engines).

Eurol Syntence 5W-30 ensures an extremely quick formation of a stable lubricating film during cold starts, which remains stable at high operating temperatures, while unnecessary friction in the engine is minimized as much as possible.

Eurol Marathol 10W-40 is an ultra high performance motor oil for trucks, based on the so-called "low SAPS" technology, which means that the levels of sulfur, phosphorus, and sulfate ash have been drastically reduced to protect exhaust gas after-treatment systems. Specifically, Mercedes (228.51) and MAN (M 3477) have established special requirements for the oil to meet EURO-4 and EURO-5 emission standards, including the requirement for reduced phosphorus, sulfur, and sulfate ash levels. For these reasons, ACEA introduced the E6 specification at the end of 2004.

Eurol Marathol 10W-40 is fuel-saving, and due to the special additive technology, both the oil and the engine are kept exceptionally clean, and the emission of harmful exhaust gases is limited in EURO-4, 5, and EURO-6 engines. This oil is suitable for extended oil change intervals, provided these are allowed by the engine manufacturer, depending on operating conditions and filtration method, thereby reducing maintenance costs.

Eurol ATF 1100 is a fully synthetic automatic transmission oil, specially developed for American and Japanese/Korean automatic transmissions, but is also suitable for most European automatic transmissions.

This oil ensures that the automatic transmission shifts smoothly under all ambient temperatures, without unnecessary friction occurring. Due to its low pour point and high VI, Eurol ATF 1100 can be used in a wide temperature range.

With its excellent oxidation and thermal stability, Eurol ATF 1100 retains its formidable properties, and prescribed oil change intervals are easily achieved. A unique combination of synthetic base oils and state-of-the-art additives guarantees trouble-free all-round use in automatic transmissions. Special friction modifiers ensure that the specific friction characteristics do not change even after a very long period.

Eurol Copper Grease is specially formulated from modified clay (non-melting bentone) and selected, high-quality solid materials, such as copper, graphite, and aluminum, as well as corrosion and oxidation inhibitors.

This grease is of the Anti-Seize Assembly Compound type. It offers durable protection against corrosion and harmful chemical effects from the outside, and is not washed away by water.

Eurol Copper Grease is recommended for the lubrication of taps and threaded ends, manifolds, battery terminals, wheel nuts, ovens, and brake pad backs to prevent twisting and friction. Gaskets and threaded connections loosen easily, even after exposure to high temperatures, corrosive media, or high loads. Eurol Copper Grease ensures that surface irregularities are filled, and the surfaces, for example when tightening nuts, do not make metal-to-metal contact. Lubricated parts are sealed off from the atmosphere.

Oscar Zircon HD SAE 20W50 is a heavy duty diesel engine oil recommended for turbo-charged and non-turbo charged engines under normal conditions. Suitable for many heavy duty engines. It meets all current industry standard requirements of major engine makers recommending API CF-4/SG, CF/SF.

G-Energy Synthetic Active 5W-40 is fully synthetic engine oil formulated for the highest level of protection demanded by high performance engines. G-Energy Synthetic Active 5W-40 with G-Base synthetic technology provides enhanced viscosity, friction and volatility performance to ensure long lasting engine life. Advanced fully synthetic formulation can help to increase engine efficiency.

Fully synthetic engine oil formulated for the highest level of protection demanded by high performance engines.